Common Problem

Feed pellet machines can be divided into two types: flat die pellet machines and flat die pellet machines. The working principle of the flat die pellet machine is to use high pressure to compact the feed. Its feeding method is mechanical forced, and the pressure is limited by the mold. The ring die pellet machine uses a ring mold and a pressure roller. The material is pressed into cylindrical pellets in the mold hole. It has a long service life and uniform feeding, which is suitable for large farms.

The production of feed processing equipment needs to be carried out according to a certain formula. If the formula is improper, the quality of the feed will decline and affect the production of the breeding industry. When encountering this situation, it is necessary to adjust the formula in time to ensure the quality of the feed. In addition, the equipment should be cleaned and disinfected regularly to prevent residual impurities and bacteria from contaminating the feed.

The feed pellet machine is mainly composed of a feeding device, a pressing device, a regulating device, a cooling device and an electronic control system. Its working principle is: the feed raw materials enter the pressing device through the feeding device, and the feed raw materials are gradually formed into pellets through the rotation and extrusion of the roller. During the pressing process, moderate moisture and temperature can enhance the plasticity of the feed and form uniform pellets with appropriate density

1、检查电源是否正常，电压是否稳定；

2、检查电机是否损坏，需及时更换；

3、检查饲料机械的传动系统是否松动，各部位是否需要紧固。

Forage silage refers to the process of processing and storing green plants, agricultural and sideline products, food residues and other plant feed materials as raw materials, in closed silage facilities (silage pits, silage trenches, silage towers and silage bags, etc.), after fermentation by microorganisms mainly lactic acid bacteria, into products that can be used for a long time.

1. The equipment that has not been used for a long time does not feed because of dust accumulation in the exhaust bag, which causes poor exhaust. Clean the exhaust bag or replace it with a new one and it can be used normally.

2. The feeding bucket is rusted, causing poor feeding. Use sandpaper to grind and remove rust from the inside of the bucket until there is no rust.