Common Problem

The layout of the feed production line should follow the following principles:

Smooth process: Arrange equipment reasonably in the order of raw material entry, processing, and finished product output to reduce detours and cross-transportation of materials. For example, the raw material receiving equipment should be close to the feed inlet, and the finished product packaging equipment should be close to the delivery port.

Efficient space utilization: Make full use of the space of the factory to avoid too loose or crowded equipment layout. Multi-layer layout or compact arrangement can be adopted.

Safety and hygiene: Ensure that there is enough safety distance between equipment for easy operation and maintenance. At the same time, it is necessary to meet hygiene standards to prevent pollution and cross infection. For example, an effective dust collection device should be set up in areas where more dust is generated.

Clear zoning: Clearly divide areas with different functions, such as raw material area, production area, finished product area, etc., for easy management and quality control.

Flexibility: The layout should take into account possible future capacity expansion or process adjustment, and reserve a certain amount of space and interfaces.

The investment cost varies depending on the scale of the cattle feed pellet production line, the degree of automation, the brand and quality of the equipment. The investment of a small production line may be tens of thousands of dollars, while a large, highly automated production line may require hundreds of thousands or even millions of dollars.

First, the goose feed pellet production line must strictly control the quality and ratio of raw materials; second, ensure the normal operation and regular maintenance of equipment, especially the parameter adjustment and maintenance of key equipment such as pellet machines; third, follow scientific production processes and procedures, and control the temperature, pressure, humidity and other parameters in the production process; finally, conduct regular product quality inspections, including indicators such as particle size, hardness, water content, and nutritional ingredients.

The type, particle size, moisture content and nutritional ingredients of raw materials will affect the operation of the pig feed pellet production line and product quality. Usually, the raw material particle size is required to be moderate, the moisture content is generally around 12%-15%, and the nutritional ingredients should meet the requirements of the feed formula. Different types of feed raw materials (such as grains, beans, protein feed, minerals, etc.) need to be matched in a certain proportion.

The capacity of sheep feed pellet production line needs to be determined by considering many factors, including production scale, market demand, investment budget, production site, etc. Generally speaking, it is calculated based on the amount of feed pellets required to be produced per hour or per day. Small production lines may have an hourly capacity of several hundred kilograms to one ton, while large production lines may have an hourly capacity of tens of tons or even hundreds of tons.

Fish feed pellet machine has many significant advantages. First, it can make raw materials such as straw and forage that are not easy to store into pellets, which is not only convenient for storage, but also greatly reduces the floor space. Secondly, the feed pellet machine has the characteristics of dry in and dry out, making the processing process more convenient and efficient. Moreover, processing feed pellets by yourself can significantly reduce costs, which can save a lot of expenses compared with purchasing finished feed pellets. In addition, the feed pellet machine has a maturation effect during the processing, which can reduce the adverse effects on digestion, and can also kill parasite eggs and other pathogenic microorganisms, which helps to improve the safety and nutritional value of feed. For example, for raising rabbits, fish, ducks and experimental animals, pellet feed made by feed pellet machine can bring higher economic benefits. Moreover, pellet feed is comprehensive in nutrition, animals are not easy to picky eaters, and can ensure a balanced daily feed supply. At the same time, pellet feed is small in size, not easy to disperse, and is convenient for bulk storage and transportation. However, it should be noted that the manufacturing cost of pellet feed is relatively high compared to powdered feed, and the pros and cons should be weighed according to the actual production situation when purchasing.

There are many things to pay attention to when using a feed pellet machine. First, a new machine must be run-in before the first use. For example, take 10-20 catties of mixed powdered feed, add 5%-10% edible oil and mix well, add feed first, start the machine and adjust the roller bolts with a wrench until the material is discharged normally. After the oily feed is repeatedly in the machine 3-5 times, gradually add dry materials. Secondly, the lighting power supply should use copper wire of not less than 4 square meters and be equipped with a 5-10A electric meter. When the machine is working, it is strictly forbidden to put your hand into the feeding port. Add a little feed before starting the machine, and leave a little feed in the machine when shutting down. If the machine is stuck during operation, it should be stopped immediately, and the roller should be tightened until the bolts are loose, and then the machine should be restarted. After each work, the adjustment roller bolts must be loosened. After the machine has been used for a period of time or has pressed out a certain number of pellets, if the pellets are broken or not solid, 2%-4% water should be added to the mixed feed. Also check the belt tightness frequently to prevent low machine output and belt slippage.

Before starting the machine: add a little powder first, then start the machine. At the same time, check whether the running direction is the same as the machine mark.

When feeding: the raw materials used cannot be too dry, and must contain a certain amount of moisture. If the crude fiber content is high, some oily raw materials can be added. When feeding, the speed should be uniform to avoid feeding too fast to cause the machine to be stuffy or feeding too slowly to cause the machine to run empty. It is strictly forbidden to put your hand into the feeding port. If you need to assist in feeding, you can use tools such as wooden sticks.

During operation: pay attention to observe the operation of the machine, such as current fluctuations, discharge conditions, and abnormal sounds. If any abnormality is found, stop the machine immediately for inspection.

When shutting down: leave a little feed in the machine to prevent the roller from contacting the template and running idle. After each work, the roller must be adjusted to loosen the bolts.

Clear your needs: determine your own breeding scale and feed needs. If you are a small farmer with low production demand, you can choose a small household pellet feed machine; if it is a large farm or feed processing plant, you need to choose a large pellet machine with high production and stable performance.

Consider raw materials: Different feed pellet machines may have different requirements for raw materials. For example, some pellet machines are suitable for processing grass powder, while others are suitable for processing grains. Choose a suitable machine based on the raw materials you usually use.

Focus on quality and performance: including the structural stability, wear resistance, production efficiency, pellet forming quality, etc. of the machine. You can refer to the evaluation and reputation of other users to choose brands and models with reliable quality.

Budget: Determine the budget range according to your own financial strength, and choose cost-effective products within the budget range. But don't just pursue low prices, so as not to buy machines of poor quality or not suitable for your needs.